DT6SY2B

Wall mounted cooker hood
Wall mounted cooker hood DT6SY2B
print
print
share
Facebook
Twitter
Code: 312585 Freestanding wall hood Control setting: Simplicity knob for easy control Maximum extraction rate by extraction operation: 618 m³/h Energy class: D Gorenje Gorenje Simplicity Collection 2 Dimensions (W×H×D): 60 × 9.5 × 43.5 cm
DT6SY2B
Jet blackShow both variations
click to collapse
BUY ONLINE
Re-circulating hoods
Re-circulating hoods draw in steam and odour saturated air through a filter, then returning the treated air into the kitchen. If ducting for extraction is not possible, then recirculation may be another option. In this case, the air is drawn through a charcoal filter that removes cooking odours and steam, and the clean air is recirculated back into the kitchen. Cooker hoods for recirculation are easy to install and are normally used in blocks of flats where installing ducts leading directly to the outside of the building can be difficult. Extraction hoods draw in cooking fumes and trap vapours in a filter while expelling odours to the outside through a ventilation duct. You can expect to have to change the charcoal filter once or twice a year, depending on how often the cooker hood is used.
Noise level
More power with less noise
In today’s homes, the kitchen is a new focal point, which in turn has focused attention on noise levels produced by cooker hoods. Over the last few years, the capacity of hoods has increased significantly, and sound-absorbing materials are increasingly being used in many of Gorenje cooker hoods.
Useful tips
• Remember to switch the cooker hood on before starting to cook, as this maximises the hood’s capacity.
• Leave the cooker hood running for another 15 minutes once you have finished cooking to remove the last few traces of cooking odours.
• Remember never to open the kitchen window when using a cooker hood, as this affects air circulation and cancels out the low pressure.
• Choose a cooker hood that is at least as wide as your hob to achieve the best effect.
Which capacity do you need?
What sort of capacity should a new cooker hood have? Capacity depends largely on the size of the kitchen. A good rule of thumb is that the hood should be able to replace the air 10 to 20 times an hour. For instance, if a kitchen measures 4 x 4 m with a ceiling height of 2.5 m, the cooker hood should replace approximately 400- 800 m3 per hour.

There will always be some loss of pressure when installing a hood. That is why it is important to observe the following rules:

• Always observe the hood’s recommended venting diameter (O) specified on the venting tube or pipe.
• Where possible, use smooth pipes to minimise air resistance.
• Try to make the installation as short as possible and with as few bends in the pipes as possible.
• You want gentle curves in the pipe rather than sharp bends, so that the air can pass through unhindered, minimising pressure loss.

The necessary extraction capacity is determined by the volume of the kitchen. The volume of the kitchen space can be calculated as follows: width x height x depth. Calculation of the power of the hood needed: volume of the kitchen x 10.

Number of meters
Number of kinks = 1 m
Pressure loss in m3/h

Technical details

Freestanding wall hood

Venting with air extraction or recirculation

Energy class: D

Material of housing/chimney: varnished steel / stainless steel

Colour of housing/chimney: black / stainless steel

Lightning efficiency class: D

Grease filtering efficiency class: C

Fluid dynamic efficiency class: D

Maximum extraction rate by extraction operation: 618 m³/h

Maximum extraction rate by recirculation operation: 572 m³/h

Venting tube diameter: 15 cm

Air flow by extraction version, step 1: 201 m³/h

Air flow by extraction version, step 3: 618 m³/h

Mechanic control

Control setting: Simplicity knob for easy control

Number of speed positions: 3

Lamp type: Halogen

On/off light switch

Number of lights: 2

Power of lights: 40 W

Filter material: Aluminium

Coal filter code (optional as separate purchase): 428642

Washable grease filter

Number of motors: 1

No return airflow flap: 150 mm

Noise level (max.): 66 dB(A)re 1 pW

Height: 95 mm

Min. height of the chimney: 485 mm

Max. height of the chimney: 955 mm

Annual energy consumption : 126.3 kWh

Dimensions (W×H×D): 60 × 9.5 × 43.5 cm

Dimensions of packed product (W×H×D): 72 × 55 × 46 cm

Net weight: 13.5 kg

Gross weight: 16.6 kg

Connected load: 240 W

Code: 312585

EAN code: 3838942001802

Enclosures